Re: Timing Chain wear allowance
Posted by Tim Stockwell On 2020/7/12 17:23:04
Hello Ross,
I am back at trying to start my 1951 300. I watched your video and found it useful. Especially the way you set the timing. I have always used a timing light. I did everything you showed and I used starting fluid to make sure I would not flood the engine. I even took off the front lifter cover to insure my compression stroke had both intake and exhaust valves closed. I do not even get a pop or back fire.
I am now wondering if I have a bad coil or condenser. Anyone's thoughts?
Tim
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=224571