Re: 327 Questions

Posted by Wesley Boyer On 2020/7/18 8:58:19

Not to disagree with Ross but to add, he is light years ahead of me and has done many, many more replacements then I would ever dream of. I had also just replaced my water pump and after back flushing. I put a thin coat of RTV (Silicone)on the gasket and on the two bolt holes where water comes out, I used shellac on those bolts and those two bolts normally have copper washers on them. As of today no leaks and counting.
Wes

Attach file:

---

  (239.29 KB)


  (209.36 KB)