Re: Fails to start warm
Posted by Wesley Boyer On 2020/7/26 22:19:34
I'm not sure which way your trying to start your Packard (Gas Pedal, Push Button or Key) so I will only cover the Gas Pedal, that's the only one I use.
I also had a problem starting my Packards, since the Service Manual didn't cover this very well for the 47. After looking back though the older manuals I found this from the 1942 Service and ever since I haven't had any problems starting my Packards, Hot or Cold.
One thing I would add is when cold to press the pedal all the way to the floor and let up on the glass pedal, this resets the carb and maybe will put an extra bit of gas before cranking.
Hope this helps!
Wes
Attach file:
(56.74 KB)
I also had a problem starting my Packards, since the Service Manual didn't cover this very well for the 47. After looking back though the older manuals I found this from the 1942 Service and ever since I haven't had any problems starting my Packards, Hot or Cold.
One thing I would add is when cold to press the pedal all the way to the floor and let up on the glass pedal, this resets the carb and maybe will put an extra bit of gas before cranking.
Hope this helps!
Wes
Attach file:
(56.74 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=225042