Re: 356 Water Pump Hub Height
Posted by JD in KC On 2020/8/17 16:45:04
Quote:
Actually, the old pump shaft was recessed considerably, maybe 1/4". But not to worry... it was secured firmly with a messy splash of welding
. I'll see what a machine shop can do make the new pump work for my '50. Will advise.
P.S. The new pump was not purchased from Kanter or Max.
Attach file:
(46.09 KB)
HH56 wrote:
...I am wondering if the shaft length might be another difference that was a compromise to get one assy. The new shaft looks a bit shorter in that photo and it would appear that to get the 1/2" behind the hub it might be recessed into the hub a slight bit in the front.
Actually, the old pump shaft was recessed considerably, maybe 1/4". But not to worry... it was secured firmly with a messy splash of welding
. I'll see what a machine shop can do make the new pump work for my '50. Will advise.P.S. The new pump was not purchased from Kanter or Max.
Attach file:
(46.09 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=225711