Re: Location of No. 1 Piston?

Posted by HH56 On 2020/8/27 21:29:13

The one next to the fan but also make sure it is on the compression stroke and not 180 out. You might pull the cap off the distributor and make sure the rotor is pointing somewhere near 7 or 8 o'clock where the wire for number 1 plug is normally positioned before removing anything. If it is pointing somewhere near 1 or 2 o'clock it is 180 out and the crank needs to make another revolution before you stop it at 6 degrees. There is also a small dot on the pump gear so gently pull the pump so you take note of that position too