Re: blower motor 50 Standard 8 not working

Posted by JWL On 2020/9/16 11:03:06

Here are some "fixes" rather than "repairs" tricks you can try to get the blower motor running.

Sometimes a light tapping on the housing will free up a stuck motor. Be careful and only do light tapping. The plastic handle end of a screwdriver is a good tool to use.

I have also cut a slot in the housing at the shaft end, opposite the fan end. Just make the cut deep enough to get through the housing material. Then squirt a small amount of oil, 3-In-1 works well. Lastly seal the slot with silicone or something like it to keep dirt and moisture out.

Like I said fixes not repairs, but they sometimes work.