Re: Bleed those brakes! 53 Clipper

Posted by kevinpackard on 2021/5/16 18:21:34
I initially used a vacuum bleeder when I did the brakes on mine. But I was unable to obtain solid brakes with it. It did a great job at getting fluid in all the lines, and I flushed a good amount through.

I went back and did the more traditional way of having a second person pump and hold the brakes. I then closed off the bleeders while they were still holding, once I was sure there were no bubbles. Got really nice brakes after that.

Furthest wheel cylinder from the master first, then work your way back to the MC from there.


This Post was from: