Re: Copper Nickel Brake Line

Posted by kevinpackard On 2021/5/30 18:10:09

I just used the pre made coated lines from Napa. Cheap and easy to use. You can bend then up just fine with your thumb. I rented a tubing bender but never used it.

Two premade lines from front to back, with a junction in the middle up along the frame rail. Much easier to work with two separate lines then one long one.

I had to cut and double flares a cult smaller lines. Double flare takes a good tool. I rented one and it was trash. I ended up borrowing my neighbor's good tool and was much more successful. If I can do double flares, anyone can. No leaks from the ones I've done.

Kevin