Re: Copper Nickel Brake Line

Posted by BigKev on 2021/6/1 11:20:33
It's nearly impossible to replace the entire brake line in one piece with the body on the frame. These were installed by the factory before the body was mated.

Buy a flaring tool and bending tool, both of which are pretty cheap, and some extra fittings. My line runs as two pieces with a connection at the midpoint on the frame rail.

I used the lines from NAPA for both brake and fuel without issue. See my project blog for more info and pics.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=234000