Re: Question for you custom guys

Posted by Ernie Vitucci On 2021/7/12 10:36:24

Good Morning...This might be a bit much, but I saw it work in my youth with an old Chrysler marine engine...the head would not come off, so the mechanic made four spark plugs into hangers and hooked them with a bit of chain to a bar and hung the engine from an engine hoist...about one inch from the ground, pan still on, and then backed off the head nuts flush with the top of the head bolts and tapped them with a big hammer...about the third time around, the engine dropped the one inch and the head was loose...fresh coffee all around...Ernie in Arizona