Engine will not turn over

Posted by Packwagon On 2021/6/21 11:50:31

I have had problems getting the engine to turn over. Last fall it got water into #7,8 cylinder exactly how not sure. The engine was turning over with starter motor but eventually stopped completely, I removed head and had water in the cylinder. Since then i cleaned out cylinder 7, 8
Polished up , honed and cleaned as best I couldI could turn engine with prying the ring gear I checked all cylinders , polished and honed. It would turn the engine quite easily with the pry. I re assembled with new head gasket. Using remote starter and 6 volt battery in only turned over 4-5 rotations. I used 12 volt battery it spun engine maybe 10 seconds and seized up and the starter only clicked. Now nothing moves. I am lost as to why the 12v would not crank it