Re: Starter Question...

Posted by HH56 On 2009/3/19 16:45:37

Very possible. If the switch is dirty or assembled incorrectly that can be a problem. Here is a section from an aftermarket manual for 49-56 cars that gives a fairly good description of operation, repair and a little better pictures than the Packard manual. The switches are similar in operation over the years but may have a bit different packaging on various carbs. Pay attention to the shims and orientation of contact assy.

EDIT: the switch diagrams are same but yellow one is done at high res so it might enlarge or print better.

Attach file:

---

Size: 293.58 KB; Hits: 60