Re: Series 22nd Distributor Wires

Posted by Packard 1948 on 2021/7/15 14:14:25
Figured it out!!!

The small wire with the two eyelets is the bonding wire from the vacuum pot bracket to the distributor body...

The metal mount of the vacuum pot bracket is bolted to the engine block and since the distributor body moves back and forth it is on a bearing and that would not be a reliable path to ground so it looks like this little wire is the path.

Attach file:



jpg  Distributor.jpg (1,118.75 KB)
84982_60f0890413ccc.jpg 2514X3116 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=235177