Re: Clipper 47- just as a spare wheel i look for a alternative rim

Posted by HH56 On 2021/10/19 18:14:10

You didn't say which Clipper you have but as I recall the models with the 356 engine also have a larger bolt pattern. For someone to recommend a good cross you might want to mention the model.

One thing making Packard wheels harder to cross is they have a larger center hole compared to most other cars -- somewhere around 3 1/2 inches.

Another minor consideration is you may not find a wheel from another mfg that has the small holes for the positioning pin used on the Packard drums. To mount a wheel without the holes you would need to remove the pin. If it is for show only and never planned to leave the trunk that would be a non issue but just something to be aware of.