Re: Rust in gas tank

Posted by Josef Lichtenberg On 2021/10/23 14:35:52

on my clipper i have got the same problem. i removed the tank and filled it with 50 very sharp edged and pointed wood screws, then shook the tank extensively. removed all 50 screws. rinsed with water, then put rust converter in the tank. then rinsed again extensively with water. after drying, reinstalled and put back into use with a large petrol filter.i did not use any seal or paint. because i have no confidence that it will distribute evenly in the tank. i change the filter once a month. this has been working for 2 years now. the filters are very inexpensive and can be hidden well. everything looks original.
BR Josef