Re: glove box
Posted by BigKev On 2021/11/30 13:45:13
I just remembered I had an unsoiled, but brittle liner in a spare glove box that I bought just for the script and lock parts.
It's got a leather/pebbled coated texture on the visible side. Plain flat uncoated card stock like texture on back. Approx 1/16 inch thick. The one in this box is brittle, already chipped and firmly glued in. So there is no removing it without destroying it any further. But serves as a good example of original material and construction.
It's cut at an angle so the front edge sites just below the reinforcement rib on the inside of the box front.
Attach file:
20211130_122803.jpg (237.41 KB)
20211130_122912.jpg (209.14 KB)
It's got a leather/pebbled coated texture on the visible side. Plain flat uncoated card stock like texture on back. Approx 1/16 inch thick. The one in this box is brittle, already chipped and firmly glued in. So there is no removing it without destroying it any further. But serves as a good example of original material and construction.
It's cut at an angle so the front edge sites just below the reinforcement rib on the inside of the box front.
Attach file:
20211130_122803.jpg (237.41 KB)
20211130_122912.jpg (209.14 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=239123