There are not any detailed factory photos of the 47 dash I am aware of. The dash does attach to the body in the same fashion as bear's 49 but the details on the instrument cluster and panels and layout is different. Here are a few photos of my 47 dash before new woodgraining was done. The one or two photos I had showing the complete intact dash seems to have gone missing though.
Two instruments are each mounted on two plates and those two plates mount to the cluster body which in turn mounts to the dash. The speedometer shares one of the cluster screws and then has an additional two which will have some spacers to keep the speedo level and adjust the presentation in the dash. There will probably be some strips of fabric webbing between the metal cluster and speedo housings to the dash mounting points for noise and vibration suppression.
Once the dash is in the body the hood and vent release handles mount to the bottom edge.
Attach file:
IMG_0643.jpeg (88.00 KB)
IMG_0644.jpeg (66.26 KB)
IMG_0645.jpeg (65.48 KB)
IMG_0646.jpeg (89.13 KB)
IMG_0647.jpeg (53.66 KB)
IMG_0648.jpeg (52.55 KB)
IMG_0852.jpeg (123.58 KB)
IMG_0847.jpeg (96.41 KB)
IMG_0848.jpeg (93.72 KB)
IMG_1116.jpeg (162.10 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=239651