Re: 1948 Limo Super 8
Posted by Duane Gunn On 2022/2/22 20:36:01
I checked the compression with a manual gage, meaning I has to hold the gage and crank the engine over. All cylinders showed the same, about 60 lbs. I'm sure it is more but that's all I could hold!
I hooked up the distributor vacuum line. That is the only vacuum line on this carburetor. I moved the sparkplugs 1 spot. I retimed the distributor.
I shot starter fluid in it and cranked it over.
The engine started! I was surprised!
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=241338