Re: 53 Cavalier Part mystery

Posted by HH56 On 2022/2/16 9:55:09
The fender contour will be the same for both and that would be, I think, the more important fit. If Lavine would provide some ID and OD dimensions for the hole and top you could see if the antenna would fit the hole. If the antenna is smaller something wrapped around it to fill the space might work as long as the OD of the piece is not so large the nut would be ineffective or its diameter be too small and leave a lot of space on the top of the plastic noticeable. If the antenna is larger than the hole then that would probably be the show stopper.

This Post was from: