Re: Help me!

Posted by Jim in Boone On 2022/3/24 5:07:22
If this:

The lever not moving issue is frequently caused by lack of lubrication on the shift levers in the engine compt at the bottom of the steering column. The top 2-3 lever in particular gets no lube and also gets condensed moisture running down the shift tube causing it to rust or corrode to the shift tube.

Try this:

Had a similar issue on my 48, there is an oil hole on the steering column in the shifter area (engine compartment). I stuck the little plastic tube on a can of PB Blaster in this hole and sprayed the area well, seemed to loosen the shifting for me.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=242134