Posted by Paul E. Gallagher On 2009/4/29 20:37:27
As you can see from the attached picture, I got the fog lights working. Thanks to all who replied, especially Big Kev for the excellent diagram.
I just followed the diagram and was careful to hide wires where I could. I used 12 ga wire (16, 14 and 12 were suggested, so I went with the thickest). I used a 20 amp in-line fuse because the fuse in the switch was 20 amp. I taped all of the connections after I crimped the wires. I only had to go back once and change the ground to the relay, and the lights went right on.
The switch under the dash looks nice and original to a 40ish
car. It has a light so that the knob glows when its on. Pretty cool !
Attach file:
(83.58 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=27415