Re: Body weight
Posted by Packard Don On 2022/5/25 13:53:10
If you're still in design mode, then put in four steel supports into the walls and mount rails to them to make it into a multi-axis gantry. That way it will be safe. The main gantry portion can probably be purchased so would need no engineering although in your case you'll probably need two devices on the rails, one for each end.
The photo is of a free-standing commercial one but something like this can easily be mounted with the posts inside the wall is easy as not with only the rails showing.
Attach file:
gantry.png (27.60 KB)
The photo is of a free-standing commercial one but something like this can easily be mounted with the posts inside the wall is easy as not with only the rails showing.
Attach file:
gantry.png (27.60 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=244267