Re: Body weight

Posted by kevinpackard on 2022/5/25 18:49:44
I wish I could find the post that Ross made about lifting the body. He used some sort of beam (wood or metal, can't remember) between the two legs on each side of the lift. Essentially the beam was sized to fit under the outer edge of the body between the front wheel and rear wheel. One beam for each side. The front leg of the lift held the front of the beam and rear leg held the rear of the beam. He took the body bolts out, then just used the lift to raise the body up. Looked like a piece of cake.


This Post was from: