Re: 1949 288 Custom Eight Packard Clutch

Posted by jfrom@kanter On 2022/6/9 14:24:25

A 288 is not a Custom 8, it is an Eight which uses the 10" clutch which he has measured. Unfortunately there is no modern interchange that can be sourced local. We should be able to help or if there is a local shop that does relining of brake and clutches for heavy equipment and trucks you may be able to have yours relined. Please call our Packard Department if interested. We would have the pressure plate, through out bearing and pilot bearing as well.

Thanks
James From
Kanter Auto Products.