Re: dashboard bezel
Posted by HH56 On 2022/6/27 10:31:36
What are you trying to do in needing to remove the decorative bezel. If the radio is already installed in the dash and you are trying to remove the radio for service there is no need to worry about the decorative bezel because it has been removed.
If it is a radio you picked up and are now wanting to install in a car that never had a radio only then would you need to worry about removing the decorative bezel or radio delete plate. Those are typically held by nuts or screws or both which are accessed from behind the dash.
If it is the decorative radio delete plate or bezel on a car without an existing radio you need to remove, then from this photo of the center dash section showing an empty hole at the radio position I would say there is a screw or stud and nut at the top of the plate and maybe another somewhere at the bottom that would need to be removed so the bezel could be lifted out.
Attach file:
22-3 switch panel.jpg (115.55 KB)
If it is a radio you picked up and are now wanting to install in a car that never had a radio only then would you need to worry about removing the decorative bezel or radio delete plate. Those are typically held by nuts or screws or both which are accessed from behind the dash.
If it is the decorative radio delete plate or bezel on a car without an existing radio you need to remove, then from this photo of the center dash section showing an empty hole at the radio position I would say there is a screw or stud and nut at the top of the plate and maybe another somewhere at the bottom that would need to be removed so the bezel could be lifted out.
Attach file:
22-3 switch panel.jpg (115.55 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=245303