Re: Low Oil Pressure, then Stall

Posted by kevinpackard On 2022/8/5 14:05:01
Like Howard said, fuel system could be part of the problem with stalling. Fuel filter, rubber line, carb, etc. Has the carb been rebuilt? If not, that wouldn't be a bad idea. I had to replace my ceramic filter with a modern paper one (couldn't clean the junk out of my ceramic). Rebuilding the carb and fuel pump solved everything else for me.

No experience with the Pertronix system, but I've heard mixed results from others. The stock components work fine for me, especially after I replaced all wear items....points, condenser, rotor, cap, wires, plugs, etc.

-Kevin

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=246761