Re: 1946 Super Clipper 8 Limo Carburetor.

Posted by Packard Don On 2022/8/23 19:36:23

An impart wrench, especially a rechargeable one, is probably not sufficient to break the drum free. The end of the puller also needs a sharp rap or two with a large steel mallet between tightening and once enough force is put onto it, it should pop off. The puller should have a hammer-type device on it too where radial force can be supplied using the mallet that will far exceed anything that any impact wrench can do. I've never had one of these not come off easily and with little effort when doing it properly.