Re: Attaching 1951 "Ultramatic" Script

Posted by kunzea On 2022/9/1 12:27:58
See attached image. I had noticed the recessed area around the pins before but didn't think about it. The rear-most pin is accessible but the other two aren't. The pins are 1/8". The tubular nylon pins 13964 are 1/8" diameter with 1/32" head thickness and 15/64" head diameter. The recessed area diameter is greater and the depth will result in a .01725" stand-off.

Attach file:

jpg  Ultramatic Script IMG_20220901_125032571_PORTRAIT.jpg (528.33 KB)
85709_6310eb5f9e6da.jpg 4000X3000 px

This Post was from: