Re: 1952 200 deluxe with 327ci dies when warm
Posted by Packard Don On 2022/9/18 18:01:36
It simply does not have a big enough surface area to allow air to get in. Blocked or not, it is going to cause restriction problems exactly as was shown and the fact that it runs differently when removed is a perfect illustration of the problem. If you do all your fuel and air mixture settings with the cleaner off, then notice a significant change putting in on afterward, clearly it is the problem! It’s not just its diameter but also its height which in itself of would cause problems.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=248376