Re: 53 Caribbean Convertible Top Lever Connection

Posted by HH56 On 2023/2/5 17:31:56
I will answer the quesstion you have on the PAC forum pver here to keep everything in one place and have access to Tobs answer and project blog.

It looks like maybe it started as a piece of half inch or so rod with a hole drilled thru for the shaft. Another hole threaded for a setscrew on the bottom to hold the rod. Question would be how it mounts to the valve lever. If there is a thru hole in the lever maybe the half inch piece was machined down so a long stem formed. If so that might be able to be duplicated by anothe threaded hole and a stud or screw screwed into the piece to go in the lever hole. Maybe some locktite to keep everything together. Just make sure when mounted that the assy can rotate in the lever hole.

Attach file:



jpg  connection.jpg (50.92 KB)
209_63e02e10d8b6a.jpg 918X828 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=253537