Re: Exhaust Manifold Questions

Posted by HH56 On 2009/5/7 12:46:29

I don't have a ready answer. As you can see from plate 92 in parts manual, both were made to come out. After 60 years though, I doubt either will without serious work. Believe Owen_D mentioned how careful you need to be with the cast iron too--a wrong hit and it can shatter.

A possibility on the tube is to find some tubing of proper size and then a drill bit and drill the old out. Don't know about the valve. Maybe others will have better suggestions.

Don't know what the original material was but here are a couple of links that might be useful now or maybe future.

various metal & tubinghttp://www.onlinemetals.com/

special size drill bits and lots of other stuffhttp://www.victornet.com/cgi-bin/victor/index.html