Re: Exhaust Manifold Questions
Posted by Carl Madsen On 2009/5/7 15:22:14
Dave, Howard-
Thanks! The tube extracted after drilling just like you said. I used a 21/64 drill bit. The tube was cracked half way through.
Brake line is 5/16, but that's too thin for a high heat situation like this, right?
As for the gaps around the shaft, I'll just live with it, fixing these other exhaust leaks will probably quiet the old car down quiet a bit.
Attach file:
(159.81 KB)
(147.49 KB)
Thanks! The tube extracted after drilling just like you said. I used a 21/64 drill bit. The tube was cracked half way through.
Brake line is 5/16, but that's too thin for a high heat situation like this, right?
As for the gaps around the shaft, I'll just live with it, fixing these other exhaust leaks will probably quiet the old car down quiet a bit.
Attach file:
(159.81 KB)
(147.49 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=27993