Ultramatic output shaft seal
Posted by 53 Cavalier On 2023/9/13 14:26:24
This weekend's project is to replace the boot on my 53 Cavalier's u-joint.
While I have things apart I plan on replacing my transmission output shaft seal and servicing the rear universal joint. I know replacing the boot is a bit tricky and I have no intention of removing the pin and ending up with my drive shaft out of balance. But are there any tricks, tips, or things to be cautious of?
Attach file:
Boot.JPG (27.23 KB)
Trans Output Shaft Seal.JPG (36.73 KB)
While I have things apart I plan on replacing my transmission output shaft seal and servicing the rear universal joint. I know replacing the boot is a bit tricky and I have no intention of removing the pin and ending up with my drive shaft out of balance. But are there any tricks, tips, or things to be cautious of?
Attach file:
Boot.JPG (27.23 KB) Trans Output Shaft Seal.JPG (36.73 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=261541