Re: Starting components
Posted by Doc On 2023/12/29 23:18:59
Hi there
I saw this device on my wdo carb assumed it had something to do with the starter or OD.
I removed it and disassembled it carefully and cleaned each component using a small brass brush and a sprits of carb cleaner. Will ohm test its function before installing the carb snd connecting the wires. I was impressed with the ingenuity in this design as it breaks the circuit as the engine starts and the incoming air keeps the butterfly open to keep the circuit open.
You can see it on the left lower of the image.
Attach file:
IMG_6011.jpeg (3,462.55 KB)
I saw this device on my wdo carb assumed it had something to do with the starter or OD.
I removed it and disassembled it carefully and cleaned each component using a small brass brush and a sprits of carb cleaner. Will ohm test its function before installing the carb snd connecting the wires. I was impressed with the ingenuity in this design as it breaks the circuit as the engine starts and the incoming air keeps the butterfly open to keep the circuit open.
You can see it on the left lower of the image.
Attach file:
IMG_6011.jpeg (3,462.55 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=266364