Re: Upholstery Refresh

Posted by Packard Don On 2023/10/22 20:24:25

For the handle removal, on pre-1955 Packard handles, they are held in by a pin. There is a special tool (still available) that would help but it's not absolutely necessary and the pins are a slip fit so without the tool, simply press the escutcheon and door panel away from the handle and look in the gap about 90 degrees to the handle or crank. You'll see the pin which should easily push out. Although I've done it by myself in the past before getting the tool, without the tool it is easier with a second pair of hands.

This photo is from eBay but seems homemade and rather expeensive compared to the one I bought years ago from J.C. Whitney!

Attach file:

---

  handletool.jpg (5.76 KB)