Re: Upholstery Refresh
Posted by 53 Cavalier On 2024/1/7 10:37:42
Quote:
A compliment from Ross makes my day! 
I picked up this Titan 650BL off FB Market Place. It had some issues after a screw had fallen out, so I got a good deal on it. It required some tinkering, but it's working well now.
If anyone is thinking about doing some upholstery work I highly recommend looking for a machine that has a walking foot and a servo motor. If you get a reasonable deal on a machine, you can use it, and then sell it again after. Or you could keep it, because you can never have too many tools.
This has been a pretty challenging project, right up there with replacing valve guides.
Attach file:
20231017_075757_resized_1.jpg (216.81 KB)
Ross wrote:
Congratulations. Very nicely done. What is your sewing machine?
A compliment from Ross makes my day! I picked up this Titan 650BL off FB Market Place. It had some issues after a screw had fallen out, so I got a good deal on it. It required some tinkering, but it's working well now.
If anyone is thinking about doing some upholstery work I highly recommend looking for a machine that has a walking foot and a servo motor. If you get a reasonable deal on a machine, you can use it, and then sell it again after. Or you could keep it, because you can never have too many tools.
This has been a pretty challenging project, right up there with replacing valve guides.
Attach file:
20231017_075757_resized_1.jpg (216.81 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=266714