Re: Body Mounts
Posted by 53 Cavalier On 2024/3/10 14:29:43
Back working on my body mounts today and hoping someone can provide a little clarity. I thought I could make sense of everything by looking at what parts are listed in the parts book, but not getting there.
First picture shows outrigger #2, or outer. Pretty clear here, I'll just remove and replace with the same combination of washers, cushions, etc.
Second picture shows the cushion between the frame and body, #2 inner. Am I correct to assume that these cushions have a shoulder that fits into the hole in the frame and the floor pan brace to keep them from sliding sideways, and then are held in place by the weight of the body?
Third pictures show the lack of cushions between the frame and body at #3 and #4 inner. Am I correct to assume that these deteriorated and have fallen out?
Attach file:
20240310_123113.jpg (3,704.14 KB)
20240310_123133.jpg (1,986.22 KB)
20240310_123144.jpg (2,580.60 KB)
First picture shows outrigger #2, or outer. Pretty clear here, I'll just remove and replace with the same combination of washers, cushions, etc.
Second picture shows the cushion between the frame and body, #2 inner. Am I correct to assume that these cushions have a shoulder that fits into the hole in the frame and the floor pan brace to keep them from sliding sideways, and then are held in place by the weight of the body?
Third pictures show the lack of cushions between the frame and body at #3 and #4 inner. Am I correct to assume that these deteriorated and have fallen out?
Attach file:
20240310_123113.jpg (3,704.14 KB)
20240310_123133.jpg (1,986.22 KB)
20240310_123144.jpg (2,580.60 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=268677