Re: Overdrive Issue...R11
Posted by Ross On 2024/5/11 20:32:58
If the governor switch is dirty, or the lockout switch, the relay will receive no signal telling the overdrive to operate. You can check the rest of the overdrive by patching a wire onto the relay at the same terminal you used to test it previously. Bring that wire inside the car and go for a drive. When you reach 25 or so ground that wire on some convenient screw or door handle and the car should go into OD when you let off the gas.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=271442