Re: 2262 Rear Tire Removal

Posted by Gary49eight On 2024/7/17 6:10:36

Here's an idea. When the car is supported on the chassis and the axle hanging, the Panhard rod will pull the rear axle to one side. This is a design fault, the stud on the chassis end of the Panhard rod is too short. Mine was broken off when I got the car, I replaced it with a 4 inch set screw, with an extra nut, washer and rubber inboard of the chassis mount. This means when the car is lifted the Panhard rod isn't under tension, and it still has play when on the ground.
Gary