Re: Stuck Valve

Posted by Owen_Dyneto On 2009/7/26 17:39:39

I need to know the tork specks and sequence for 51' 200 with 327

Presume you mean cylinder head torque? The specs and sequence are in the shop manual which you can find on this site. In a nutshell torque should be 740 to 760 pound-inches, or about 63 pound-feet. Do them in several steps, starting at about 30, then perhaps 50, then to final torque, retorque after about an hour of running and after the engine has cooled again. Then check again in a couple of weeks of use. Sequence is basically a spiral starting in the center and head mid-length. See diagrams in shop manual.