Re: I just have to ask

Posted by Ross On 2010/3/14 20:25:28

I have a delightfully sneaky trick for that problem. Use double sided molding tape, available at a good auto parts store. Clean the paint and the molding well, apply the tape and stick that puppy on. The tape is rather thick, resiliant, and tenacious. If the molding is hollow and the tape does not protrude. then put on a couple of layers of tape. Or, fill the back of the molding with bondo or epoxy, then put on the tape and stick it on. After a day of setting, it will be on tighter than with a molding clip.