Re: Suggestions on Wires, Spark plugs, and gap settings
Posted by Owen_Dyneto On 2010/3/30 9:28:53
Points, condensor, rotor, cap, coil, voltage regulator and more are mostly readily available at NAPA though you may want to have the part numbers for them and will probably need to wait for overnight delivery. The chart giving the current NAPA numbers is on this site several times, but I'll post it again. You'll have to know if you have Delco or AutoLite equipment. If you don't have a NAPA, I've also enclosed the Standard Igntion chart, I believe most of these numbers are still current.
Spark plug gap is given in the owner's manual which is on this website I'm sure, also in the specifications. Almost certainly it's 0.025". The AutoLite spark plug finder on the AutoLite website will identify the right current plug, either AL 303 or 308 as I recall, also AC 46 which I believe is readily available though in a resistor plug style.
Attach file:
(196.50 KB)
(188.00 KB)
Spark plug gap is given in the owner's manual which is on this website I'm sure, also in the specifications. Almost certainly it's 0.025". The AutoLite spark plug finder on the AutoLite website will identify the right current plug, either AL 303 or 308 as I recall, also AC 46 which I believe is readily available though in a resistor plug style.
Attach file:
(196.50 KB)
(188.00 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=50298