Re: Water distribution tube

Posted by gone1951 On 2010/7/6 22:09:54

Just a thought, The drop on the radiator cap could be wrong. Don't remember what it should be but you can measure the radiator neck. With cap removed,of corse, measure the distance from the top surface of the filler neck to the surface inside where the cap is supposed to seal and compare that to the cap. You may find out that the cap you have may only measure 3/4" where the filler neck measures 1 inch. It would be like running the car with the cap removed. When I got my car the cap was wrong which caused pretty much the same thing you are experiencing.



Good Luck

Note: the engine may be boiling over and then overheating not overheating and then boiling over. That statement should generate some discussion.