Re: Gear Start neutral safety switch linkage and anchor
Posted by BigKev On 2010/9/1 12:16:54
Craig,
This is what it looks like on my car. But, the anchor and linkage is not stock. Looks like someone cobble together an anchor, it's a piece of small threaded rod with a nut and tab welded to it that screws into the shifter tube. But they didn't set up the geometry right, and it of course broken again. When I got the car the linkage was also broken, and I make a new piece out of some thicker stainless rod. I really don't know what the actual oem anchor is supposed to look like.
Now, it a perfect world I would like to have an OEM anchor, linkage, and switch, so I know I have a good working set, rather that the cobbled pieces I have now.
Thanks!
Attach file:
(150.38 KB)
This is what it looks like on my car. But, the anchor and linkage is not stock. Looks like someone cobble together an anchor, it's a piece of small threaded rod with a nut and tab welded to it that screws into the shifter tube. But they didn't set up the geometry right, and it of course broken again. When I got the car the linkage was also broken, and I make a new piece out of some thicker stainless rod. I really don't know what the actual oem anchor is supposed to look like.
Now, it a perfect world I would like to have an OEM anchor, linkage, and switch, so I know I have a good working set, rather that the cobbled pieces I have now.
Thanks!
Attach file:
(150.38 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=59080