Re: Smoke Problem
Posted by Joe Santana On 2010/11/11 16:53:11
This is an excellent solution. I'd never done anything like this before. The advice I got was
1. Spread out a cloth to keep track of all parts removed.
2. Place parts closest to the side they came off of.
3. Religiously follow the order of your kit's instructions.
4. Get a stool and a cup of coffee.
I took notes as I progressed, just in case I screwed up.
100 something parts, all back together and operational.
Yes, you can!
Attach file:
(127.68 KB)
1. Spread out a cloth to keep track of all parts removed.
2. Place parts closest to the side they came off of.
3. Religiously follow the order of your kit's instructions.
4. Get a stool and a cup of coffee.
I took notes as I progressed, just in case I screwed up.
100 something parts, all back together and operational.
Yes, you can!
Attach file:
(127.68 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=64087