Re: Ultramatic Clutch Disc and Linkage questions

Posted by Mike On 2010/11/17 14:22:35

Found out from the tranny shop today that the clutch discs inside the tranny were toast (i had dropped of a new set just in case) and that the bands were about done too (about to send those to kanter)

The clearance on the bushings that are in the blind converter hole that the input shaft from the tranny rides on are .009, so i'll put that back together with the NOS clutch disc and set it aside.

Thanks again for everyone's input, hope to have this car back together in the near future driving running and shifting smooth!

Edit: Just saw that the clearance is supposed to be .003, not .03 -- guess i'll be changing those bushings after all.