Re: Ultramatic Clutch Disc and Linkage questions
Posted by HH56 On 2011/1/31 13:40:17
With 7 quarts, once the converter starts filling, and then pumping out to the cooler setup, there isn't much left. I don't know if it would even be high enough to cover the filter. I would add at least 3 more and then see.
If you have the one piece curved link as shown in bulletin 50-T6 and here in new link photo then it is 5/16 but if you have the older two piece link with a bolt shown in old link, it is the original adj dimension.
Attach file:
(11.17 KB)
(20.91 KB)
If you have the one piece curved link as shown in bulletin 50-T6 and here in new link photo then it is 5/16 but if you have the older two piece link with a bolt shown in old link, it is the original adj dimension.
Attach file:
(11.17 KB) (20.91 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=69947