Re: 1947 Super Custom Fog lights
Posted by Dave Kenney On 2010/11/26 17:34:47
The foglights on my '47 Super Clipper and on my '47 Custom parts car are marked with the single word "Packard" on top. I believe on both cars these are the dealer installed options. They are mounted through the bumper valence/gravel shield panel with a single bolt(I think that is what it is called ) as per photo attached.
You may want to check the "Foflight" switch on the dash. There may not be a switch but only the knob. If there is a switch then the foglights were likely dealer installed and the holes should be evident; if not the option was not purchased.
Attach file:
(111.15 KB)
You may want to check the "Foflight" switch on the dash. There may not be a switch but only the knob. If there is a switch then the foglights were likely dealer installed and the holes should be evident; if not the option was not purchased.
Attach file:
(111.15 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=65278