Re: 6 volt to 12 volt conversion
Posted by BigKev On 2010/12/26 19:39:19
Check my project blog, I go over installing a alternator in my '54. A standard GM 10SI alternator will work great. They are cheap and plentiful.
You will need to fab up a new lower bracket, the top Packard bracket can be reused with a spacer. I made a lower bracket out of a heavy duty piece of angle iron, some heavy duty L brackets, and a few bolts. It bolts to the block where the lower generator bracket bolted before.
Attach file:
(84.51 KB)
(176.73 KB)
You will need to fab up a new lower bracket, the top Packard bracket can be reused with a spacer. I made a lower bracket out of a heavy duty piece of angle iron, some heavy duty L brackets, and a few bolts. It bolts to the block where the lower generator bracket bolted before.
Attach file:
(84.51 KB)
(176.73 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=67246