48 49 50 Backup Lights

Posted by Johnny On 2011/1/29 23:49:45
Facts before the question:

-Restoring a '48. '48 was a "manual".
-Pulled the motor, trans and steering colum from the '48.
-Pulled the motor, trans and steering colum from a '50 to place into the '48.
-The '50 is an automatic.
-Pulled the Wire Harness from the '50, rebuilding to place into the '48.
-Found the backup Lamp wire running from the lamp, along the frame, to a small switch located on the steering column.
-This switch has 4 wires going to it. I can not find any schematic for this switch.

Does anybody know where the other 3 wires go or where I can find that particular schematic?

Thank you.

Johnny

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=69798